Eskofot-purup imagesetter , starting point of printing is not stable. Cairo, Egypt.

Steve42

New member
The starting point of printing is not stable…….usually it starts 55 Cm ahead although it cuts the film accurately (for example, 70-100 exactly when asked to do so) ……sometimes the unpleasant shifting becomes the opposite in which it starts printing after leaving 8 cm blank ……

After trying a huge number in the " measured offest " input the starting point of printing became good and a complete file of 106 * 70 was successfully printed. However, the instability is still a problem in which three or four films are ruined in every 10 ones printed. There is not certain constant pattern for the mistaken films; for example, It was once recorded as follows: 2 films shifted "55" cms , three ones good, one shifted, four ones good, two ones shifted.

Thanks for any comments or private messages to my email. [email protected]
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top