Seems like you'll need to change the profile you use in the Press tp of your ApogeeX ticket. I suggest you try different profile combination, set your rendering intent to "absolute colorimetric" in your proofer tp (so you get the paper tint simulated on your Epson) and see if you get a close enough match. If that's the case and the match is not perfect, you can always edit the profile (given you have the appropriate tools to do so). Else, you will have to make a new profile for that press-ink-paper combination. If you are not familiar with the procedure, I suggest you call your Agfa rep or hire a consultant. Good luck.
__________________
Better train people and risk they leave - than do nothing and risk they stay.
|
