Quote:
Originally Posted by Grnofslt
Where I work, we create a paper envelope (heavy stock like 100 lb card stock) that is taped on three sides making a pocket. We place a reference number on the pocket, usually our plate number and the item number of the particular job so we can find it easily and store like plates in the same area near the press they are used on. My company had some old very narrow shelved cabinets that they turned onto their side and the plates are stored in these vertically.
Bill Jacobs
|
We're doing almost the same thing in most locations but Shelves are horizontal. We also reuse the slip sheets in between the plates that are placed in the sleeve to prevent scratching.
