Job tilt problem with Avantra 44‏

[Muhammad Hassan]

hi,
i am facing image tilt problem with my Avantra 44S, I have exposed 4 color job and check registration is ok but when I flip any color and paste it to emulsion to emulsion and check registration, from top side of job mark move about 2mm,
i have checked my job scal from top and bottom are ok but found about 2mm perpendicularly out.

kindly advice....

[VladCanada]

That's a doubled error, actually you have 1mm.
Spinner motor installed unparallel to drum axis.

[jong mook kim]

I think you are changed spin - motor.
So that is SKEW problem. Ple call Service man, Re-install Spin Motor.

Be careful - It will be come Bow problem.

Thanks
Seoul Korea

[kacemoussa]

Salam
give error number

[Armya Inc]

Hi Muhammad,

I can help you to align Spinner and BOL on your spinner online. No problem.

contact me farshad@armyaservices.com or armyaservices1 on skype.com.
www.armyaservices.com

Regards,

[jong mook kim]

BOL is possible with communication use AVDIAG any version , But 100% can not adjust SKEW problem.

Pls call your engineer, Re-install spin motor.

If you want solve yourself, Pls Let me know.

Thanks

[Armya Inc]

I am surprised. Very surprised. Installing a Spinner Motor is such a big deal. Follow my instruction step by step. Max 25 minutes included BOl. We have done this more thab 15 times online.


Farshad

[Armya Inc]

100% Can be done online. It all depends who is on other side of line giving you guide line.

[jong mook kim]

Really?

I'm sorry. I didn't know that.

If possible I want know How to do.

Thanks

[Armya Inc]

Really!

If you were/are a service engineer for AGFA, and you have Removed/ Installed the spinner few times, you know there is only one trick to put the spinner in the holder right.
Information cost money. You are saying the BOL can be done ONLINE. Do you think it is easy to guide a customer who doesn't know how to work with AVDIAG and UNIDIAG to Align the BOL.Most of the time they can't even manage to connect to engine.

I like to know how you guide a customer who is unfamiliar with AVDIAG to Align BOL??? Sure the safety of his machine has to be our primary concern.