Can anybody identify this part please?

[carl_do]

Hi all,

So i've cleared the room where our old Agfa Avantra 44 image setter once stood and i've discovered this part. Could anybody identify what it is please? There are not many clues. The box it is stored in has a barcode and text which reads "GJ + 63043", "1 stk WA52K MA 1", "Origin DENMARK".

On the part itself it just says "230V - 1500W", "6250 EICHEN"



If anybody can let me know what this is if possible so i can decide whether i can use it for something else or just trash it!

Best regards,

Carl.

[maxon]

Heater element from the film processor dryer section.

[VladCanada]

I think many users would be glad to have that heater as spare one.
Carl, dont put it in the trash!

[carl_do]

Cheers guys, so how much are these things to buy?

Thanks,

Carl.

[VladCanada]

Farshad from Armya Service could get you some info about the price.
IMHO: if you know AGFA price - divide it by 2 for customer's satisfaction
for 50$ plus mailing - very reasonable; for you - that's like pick-up 50$ from the floor.

[Armya Inc]

Ok Vlad is right.

It is $120.00 CAD in Canada. In other countries it has different price range and as far as I know it is higher than $120.00. If it is lower, I have never heard of it.

I know somebody in Argentina sold it for $450.00 USD and in Iran $720.00 USD.Well, who knows, perhaps in Africa it has the price of a Diamond. Good Luck.

[carl_do]

Ok Vlad is right.

It is $120.00 CAD in Canada. In other countries it has different price range and as far as I know it is higher than $120.00. If it is lower, I have never heard of it.

I know somebody in Argentina sold it for $450.00 USD and in Iran $720.00 USD.Well, who knows, perhaps in Africa it has the price of a Diamond. Good Luck.

Ah ok, might be worth looking into selling then (not trashing!). Is there any information on this part i can find on the internet? An hour of googling provided no results.

Thanks again,

Carl.

[Armya Inc]

Ah ok, might be worth looking into selling then (not trashing!). Is there any information on this part i can find on the internet? An hour of googling provided no results.

Thanks again,

Carl.

Hi Carl,
What do you need? I am the internet Guy.

The Dryer heater element used for the Agfaline 20,30,44 Processors for Phoenix2000/2250 and Avantra 44 XT and sometimes Avantra 44/30. We or Agfa Engineers call it short processor with Sandwich board. I do not know what VLAD Call it.

Do not ask me for the Part Number. It might be company confidential.
Please see the attached pictures of the OLP with above mentioned engines.

Hope this will help!

Farshad

[VladCanada]

I call it the same name, Farshad.
BTW he has a part # (see the start topic).
All parts are very special in prepress and are not in high demand, but reasonable price will force the speed of selling
carl_do - be patient and sooner or late you will pickup your 50 buks off the supermarket floor.

[Armya Inc]

Good Advise Vlad!!!!