registration problem on avantra 30

[Buchu]

hi everybody i'm trying to adjust a 0.1mm registration problem while imaging a full colored A4 job on xitron navigator 7rip using the media saving option. The two separated colors (cyan, magenta) and( yellow,black) are correctly registered. but in the direction where media is moving the second set (yellow and black) is 0.1mm out off registration. I tried to align the carriage using AVDIAG but the result is still the same. Anyone had experience the same problem and manage to correct it please I need your help. thanks a lot.

[michaelejahn]

no link behind that red text...

Carriage Stability test on a Film

[maxon]

Vlad, is a focus adjustment - focus.fil test useful in this case ? Although I admit it's not intended as a drum geometry characterization tool.

[Armya Inc]

Hi Buchu,

I removed my post since it has been making confusion for people like Michael. Please contact me directly, Farshad@armyaservices.com. I will help you to fix the problem!

Hi Buchu,

I just sent you a PM. Please check it out.

Regards,

[Buchu]

thank you all for showing keen interest in helping me.Vlad thank you very much.i just unchecked fill the whole drum option and know i am here to thank you.i have touched some of the delicate parts of the machine and i was not sure what to do next.

[VladCanada]

Just wait for the new problems to appear. If no problem - sleep well!

[Armya Inc]

hi everybody i'm trying to adjust a 0.1mm registration problem while imaging a full colored A4 job on xitron navigator 7rip using the media saving option. The two separated colors (cyan, magenta) and( yellow,black) are correctly registered. but in the direction where media is moving the second set (yellow and black) is 0.1mm out off registration. I tried to align the carriage using AVDIAG but the result is still the same. Anyone had experience the same problem and manage to correct it please I need your help. thanks a lot.

I just sent you an instruction to fix the problem. Please check your email.

Hope this will help!!!


Regards,

[VladCanada]

Farshad, you insistently recommend laxative to cure a headache
AGFA told - that's impossible to fix that problem, just follow the rule like Fill Row.

[Armya Inc]

Farshad, you insistently recommend laxative to cure a headache
AGFA told - that's impossible to fix that problem, just follow the rule like Fill Row.

Vlad, Not yet! That is the cheap solution my friend! Let me work on it..I Have to do this!This is an argument I have had with Agfa Belgium Support Engineers . You can laugh later.
Happy to see you are back here after a few days. Have you been busy supporting the political parties in Canada? HA HA

[Armya Inc]

hi everybody i'm trying to adjust a 0.1mm registration problem while imaging a full colored A4 job on xitron navigator 7rip using the media saving option. The two separated colors (cyan, magenta) and( yellow,black) are correctly registered. but in the direction where media is moving the second set (yellow and black) is 0.1mm out off registration. I tried to align the carriage using AVDIAG but the result is still the same. Anyone had experience the same problem and manage to correct it please I need your help. thanks a lot.

Hi Buchu, Keep me updated on the instruction. 2 more Guide lines will be followed. Check your email.