Avantra 44 error 149

[miamiseps]

I started the Avantra 44 and I received an Error 149.
Any suggestions guys?? Big problem or little one?

[Armya Inc]

I started the Avantra 44 and I received an Error 149.
Any suggestions guys?? Big problem or little one?

Major problem with your Spinner. It turns, but stops after a few seconds.Spinner Problem or the DEC board. Can be fixed if you find the Right TECH.

[miamiseps]

Not good....

Does that mean I need a new spin motor or DEC board it can be fixed/finessed another way.

[miamiseps]

I can hear it spool up then slows down

[Armya Inc]

I can hear it spool up then slows down

Exactly! Possible Dec Problem, but you have to make sure about spinner's operation first. Have you tried to download the Firmwares on DEC or Power problem(Fluctuation)? Do you live in Canada?

[miamiseps]

No I haven't, when I open the right panel on the Avantra I see a floppy disk in a metal tray. Is this the updates you are talking about?

[miamiseps]

Sorry. I live in South Florida....

[Armya Inc]

Sorry. I live in South Florida....

No! you do not have the firmwares there. Open the left door. Try to turn the Spinner manually with your fingers. Is it free to turn? (TURN THE MACHINE OFF). Is it? YES.
Error 149 happens when you Turn the Machine ON. It happens during boot process, Isn't it? Order an Avantra DEC PCB USED= $3500~$3800+, but you will still need to upgrade the firmwares. Any local Service Engineer?.
I can fix your DEC problem for $1500 CAD. I will Ship you 2 Ics , you will install them on your DEC PCB. I will connect to your Computer Via Team viewer.com and will set up your DEC Parameters and Align your Machine. Satisfaction Guaranteed!

Farshad@armyaservices.com

Remote Diagnostic and online Support.
An easy way to get help
You must have the following softwares and hardwares installed on the
Pc( RIP Station) and connected to your Machine:
- www.Skype.com
- www.Teamviewer.com
- Null Modem cable, Mic, Webcam


Call: +1-416-706-5473

Armyaservices1 on Skype

[leo]

If you are in Florida, Miami, you should call Gary @ 954-254-5416. He is expert.
Good luck buddy

[Armya Inc]

If you are in Florida, Miami, you should call Gary @ 954-254-5416. He is expert.
Good luck buddy

Agree! You should Call someone like Gary in Florida. He can check the Machine. He will start from Carriage board, Spinner to DEC PCB. He will download the firmwares to DEC. I hope your machine will start working, but if Gary offered you to buy a DEC Board, Contact me! I can fix it for you remotely as I mentioned.


Good Luck!