Konica plate

[Mylar]

Anyone have any experience with Konica Minolta plates in CTP? Thanks.

[rbailleu]

I had the konica guys stop by and they said I needed a 60mw laser upgrade to our prosetter. so I had to never even tried them.

[Matt]

I noted on another posting. I was told by a another vendor and a repair tech of imagers that the NEW Konica CTP plate is a good product and worth looking at. But you need to get them to do some testing with your equipment.

matt

[KMGI Sales]

Matt, quite true, we do like to make sure the CTP device and proecessor are suited to our plates, as not all installs are created equal. We have no problem if you want to test our plates in getting demo orders setup, and sent in, along with having one of our techs on site to perform the demo for your facility.

As with all manufacturers, we like to show our plates in its best possible light, and with today's economy, it does not hurt to look around now and again, for better pricing, and better quality, as we move forward with technology, the plates and their abilites from all manufacturers become better with time.

[KMGI Sales]

Rob, yep you do need a 60mw laser upgrade to your prosetter. Which we discussed when I came into your location with KW(doug). Your current laser on that device I believe was either a 5mw or 30mw. Which is simply too low for a standard Violet Photopolymer.