plates LOTEM 400

[Henry Pérez]

faint lines on the plate developer desoues

[PACH]

faint lines on the plate developer desoues

Make sure that the chemistry is OK. very important.
Go over the calibration of the Lotem. Focus/ Intensity/ Resolution
Try a diferent batch of plate.
Good luck

[Henry Pérez]

We review the focus and intensity and did a text with various intensities of 300 to 400 from 10 to 10 and speed resolution 100 600, 98% disappear in peak intensity of 400.
Damage that may result in the Lotem 400 or processes in addition to this I can do to make the laser not be forced to correct error in the plates eses initially palnteadi hairline lines across the plate.
I mean when I said to try a new production of the plate.

[Henry Pérez]

lines that appear throughout the motion are exactly continuous couples throughout the area from side to side

[Kevin@Kodak]

lines that appear throughout the motion are exactly continuous couples throughout the area from side to side

Hi Henry - it's tough to diagnose this by email, especially with language challenges in between. Can I help you get in touch with a Kodak service channel? Where are you located?

Kevin.

[ansoft]

It sounds like the felts need oiling. If they are dry you will have fine parallel strips. You can do it alone.

[Henry Pérez]

Hi Henry - it's tough to diagnose this by email, especially with language challenges in between. Can I help you get in touch with a Kodak service channel? Where are you located?

Kevin.

We are located in the city of Armenia Quindio - Colombia Phone 57 6 745 38 55 Henry Pérez

[Kevin@Kodak]

We are located in the city of Armenia Quindio - Colombia Phone 57 6 745 38 55 Henry Pérez

Hi Henry - I've asked my colleagues there to get someone in touch with you to help. Let me know if you don't hear from them.

Kevin.

[Henry Pérez]

Hi Kevin, thanks for your timely help, but so far February 28 I have received no response to this request for help from contacts in this area for the solution of the problems I have with Lotem 400

[Kevin@Kodak]

Hi Kevin, thanks for your timely help, but so far February 28 I have received no response to this request for help from contacts in this area for the solution of the problems I have with Lotem 400

Sorry Henry - I've asked them again to get in contact with you, and will follow up tomorrow to ensure they have by then.

Kevin.