Life expectancy of a Xerox 700

[Damian Lacey]

We are currently running 2 Xerox 700's. They have both done 1.2 million clicks (SRA3) in 13 months. We now see an engineer once a week and are losing about a days production per week.

Does anyone have an idea of the life expentancy of these machines. I have been told to expect no more than 5 million clicks A4, 2.5 million (SRA3).

Is anyone out there doing these volumes or more on this machine?

[Craig]

Check your CED... it should have that information as well as the service call rate. If they are not performing tell your salesperson you want to implement your Total Satisfaction Guarantee.

[Damian Lacey]

Hi, what do you mean by CED?

[Craig]

Customer Expectations Document.... ask your sales monkey, it should have been given to you when you signed off on installation, signed by you (owner), sales monkey, and technician with everyone agreeing what the Expectations of the device are.

[Damian Lacey]

I received this exact document only a few days ago. We have had these machines for 13 months now.

Thanks I will have a read through.

[Craig]

Good Luck! This is your "Holy Grail" for what the device can and can't do... your safety net.

[sarahd]

we run a 700 it goes in streaks, i think we have had every part replaced since we got it in house in October. I would say we are down for a sevice call on average once a month. Our service tech has arranged for us to store certain parts here so we do not have to wait for the ordering process. If you have a good relationship with the service tech they are a great allie and shoudl be able to help you out quite a bit getting what you need from Xerox.

[wildcatt]

Not sure about you guys - but I've got 520,000 in 8 1/2 months and I'm in discussions already to replace my 700.

I've got way more clicks on our 240 and it keep ticking along nicely

The print quality has deteriorated a lot and they are telling me "that is the best it will do".

Luckily - my "monkey" is on my side - so far, and we have a service contract, so it's costing Xerox to service the machine.

Personally - I think the 700 was brought to market too soon as it has a lot of mechanical bugs. Not to mention the issues with the drums and some of the other consumables.

[Damian Lacey]

Hi.

Both machines have now done around 1.3 million clicks, the quality has never dropped but the machine has slowed down considerably. We are about to purchase a 7002 which will hopefully take some of the pressure off of the 700's.

I honestly can't see the 2 700's lasting us more than another year.

[yanger]

I have been working with a 700 with a creo frontend for over a year (two years with a 8000ap, two years 8000, and about three years on a 2060, all creo dfes.) So far the 700 has been adequate in color performance and quality, save a few hiccups with fuser roll issues and a bent baffold... its at 1.7 million clicks, and it gets a pm about once every one to two months. Great for medium to high runs, and the light production finishing unit is good on the end. If you are experiencing issues, make sure your using true toner, that the drums are really good shape (and the developer housing as well) and that the belt is in good shape too (do mention the 1st btr rolls on them to your service tech as those wear too). Just recently, our external calibrator, the i1 pro, hicupped and we'll be getting a new one. A bad calibrator will result in poor quality issues too...

Why are the engineers in for? Color quality issues or other issues like artifacts and deletions?