Xerox Docucolor 252 - White line in Image

[Massy]

Well done mate.

If you don't mind me asking you, how did you get the xerox tech repair manual?

[PrintingFools]

I purchased it from a 3 rd party, it has been amazing. If you would like a copy I can send you one.

[Massy]

I would be very grateful if you could send me a copy. You are a star!
I never thought you could get one if you are not a xerox engineer. Wonderful!

please send to: masnsena(at)gmail.com

Please let me know if you want some money for it.

Best regards,

[Massy]

PrintingFools : Thank you ever so much for sharing the manual . I really appreciate it. You are very kind.

[2docucolors]

I purchased it from a 3 rd party, it has been amazing. If you would like a copy I can send you one.

Hi Printing Fools.

Have been following this thread.... Am having similar line issues with our Docucolor 252. Any chance you could fwd me the manual as well? Very difficult to find info re: servicing these units. misterokra(at)hotmail.com


Thanks!!!

[lewleep]

Hi PrintingFools,

I have a Xerox252C , am experiencing a similar problem , I have 2 x white lines in direction of travel. No one has been able to give me assistance or direction on the repair procedure or accesiing the ROS . I would be grateful if you could forward me the ROS Manual that you talk about.

My Email address is : backpage@icon.co.za or info@thebackpage.co.za

Many thanks in anticipation
lewleep

[vibin]

Hi, PrintingFools, Hope you are well, Could you please send me the repair manual to vibin@jetprintlimited.com

Thanks

Vibin

[Aurelio4783]

Hello, if you can send me a copy of repair manual I'll be very glad.
My email: info@foliogranada.es
Thanks.
Best regards.

[tiger_scout]

If its in all colors its not the ros. There are 2 ros's. A black/cyan and a magenta/yellow ros. Run a half tone of each color to make sure.

[Keith]

I had the exact same problem last week on my 252 in the yellow. The tech checked the ROS, mirrors and what not but that didn't fix it. Much to our surprise, the white streak was caused by a piece of lint stuck in the developer housing. When you pull the drum out of the way and look at the silver roller with ridges and you can see a shallow spot where the lint is. It was trapped on the top of the roller so you have to remove the two screws holding the black plastic cover on and move that out of the way. Then slide a piece of paper in there to get the lint out. No more white streak. Now I have to sweep and dust my shop more often!