Calibration go a Oki 9800

[Darlek]

Has anyone ever calibrated a Oki 9800. I have scrolled through the menu and can not find it. It is printing marginally out of square and am hoping this will fix this issue.

[esmith214]

Not likely. If the printing is not square with the paper, it's a feed issue. The paper is skewing as its being fed into the printer. Most likely the the paper feed in rollers need cleaning or replacing.

[richsweeney]

It is the nature of the machine, you will have to skew the file.
I have 3 of this type of machine.

You can replace the feed roller, but look at the machine, it is going to give you tight register.

Even after you fix it, then the paper does a little shrinking, and not always evenly.