Results 1 to 2 of 2
  1. 10-05-2011, 08:59 AM #1
    T_Roast
    T_Roast is offline Junior Member
    Join Date
    Jan 2010
    Posts
    5

    Default Indigo 1050 color calibration problems

    Try to do a densitometer calibration and the yellow will not move. Any suggestions?
    Reply With Quote Reply With Quote
  2. 10-13-2011, 01:22 PM #2
    ChristopheF1
    ChristopheF1 is offline Junior Member
    Join Date
    May 2011
    Posts
    11

    Default

    Are you sure that the density in the tank, or the board in the ink tank is okay?
    If there isn't enough pigment in the tank you won't get it higher..then what 's in the tank.
    Or it might be that the inline is "broken" that it doesn't see the yellow channel...I thought, but it is some time ago that you're able to some factory setting or a firmware upgrade. (but I'm sure on the last one...)
    Reply With Quote Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Sponsors

Esko Sponsored Content

WhatTheyThink Sites