Thermanent (synthetic paper) on Xerox 700

[jotterpinky]

I'm trying to run a job on Nekoosa Thermanent synthetic paper (8mil) on our Xerox 700. I'm having trouble getting a good transfer onto the sheet. I've only tried the "Coated reload" 300 gsm setting but want to avoid having too much waste since this is a very expensive sheet and I ordered one package which was just enough to do the job.

I'm hoping someone has figured out the best settings to run this stock?

[hondarr9]

Are you sure you have the digital version of that stock? They make it both ways.

[Emtri]

We are currently testing this on our 6500, it looks pretty good so far

[Zwicker Press]

We used to run this stock on a KM BizHub 6500 (wax based toner) with no problems.
The "Thermanent" is digital, the offset version is called "Synaps"

We since upgraded to a Ricoh 720/900 (oil based) and the results have been mixed.

Xerox makes a synthetic paper, it's called "Never Tear" It's also waterproof.
I haven't tried it, but that's the first thing Xerox is going to tell you to try.

I might try it on the Ricoh soon.

[wmwilker]

We run the Thermanent regularly on our Canon 7010 and ran it on a Xerox 7000 with no problems.