AGFA Avantra 44 Nip problem

[PrismaColor]

Hello, im having problem with my AGFA Avantra 44s the film loads perfectly but when i try to do a film feed it says error 06, but the film is not jammed.
when i take a closer look i found that the Nip motor is spinning backwards.

i anyone can help me please.

[VladCanada]

How did you find that? ...by removing the outter part of NIP Assy?

[PrismaColor]

The problem is basically that when the agfa loads the film and process the first color (or piece of film ),when the second one is going to start filming, the film does not advance into the take up cassette, and it shows "ERROR 06", thats why we thought that maybe the problem was inside the NIP Drive Assembly or the little motor at the end of the nip, but they seems fine to us, actually you can hear the motor spining in the "film feed", but the film doesnt move.

Please, any help you can give us is very welcomed

[VladCanada]

You have to check NIP's solenoids and flat spring to be sure you have a good pressure between NIP rollers. All part located at Outter NIP Assy