Coating question

[viclpp]

I think we use semi gloss aq coating which still has a nice decent gloss. My question was is there a high gloss aq coating and does it look similar to uv coating? Also anyone know much about pri air blanket ir dryer.

[Albert Noel]

there are coatings out there labeled as extra high gloss, but are only really intended for single sided printing. you can use it for w+turn or 2 sided stuff, but it's tricky. iwas forced to do it for 2 years

it's no where near as shiny as UV

[arfamoe]

Sorry there is no AQ coating that comes near to UV. The more gloss you need the more solids in the coating you need, The coating would never dry.

[earlhubbs]

The NiCoat 2710 is the highest gloss Aqueous coating I have seen that can be used as two sided. it can rival UV with a stock with decent holdout.

[arfamoe]

The NiCoat 2710 is the highest gloss Aqueous coating I have seen that can be used as two sided. it can rival UV with a stock with decent holdout.

Our UV coating gives a Gloss reading of almost 97 on SBS, are you saying i can get the equivalent with waterbase? I'm willing to try anything.

[viclpp]

same here i am willing to try it too. don't have to waste time going to uv coating and all the headache with hybrid or uv ink. thanks man ill give it a try. or who can i contact to get this coating from in the US