HELP Immediately: How to lock the Spinner -Dol800v?

[osmond]

I'm about to transport my Dolev800v to a new location few hours from now. But Im lost in locking the spinnner.

I have the locking bars but I don't seem to find where to place them. An illustration would be more helpful to guide me.

Email me at osmond55@yahoo.com

Happy Holidays!

Thanks in advance.

[PACH]

I'm about to transport my Dolev800v to a new location few hours from now. But Im lost in locking the spinnner.

I have the locking bars but I don't seem to find where to place them. An illustration would be more helpful to guide me.

Email me at osmond55@yahoo.com

Happy Holidays!

Thanks in advance.

You need a bolt that locks down the dynamic optics near the End Position. You will find the the hole where the bolt goes into under the V block, as I said before near the EP.
The RED brackets are for the Spreader.
Also the Film Cassette Assy needs to be locked by screws on Both Sides.
Good luck.

[osmond]

Thanks PACH. Already done the transfer, found the lock positions just before moving the dolev. All is ok.