Linearize Kodak DI Press
Has anyone had experience linearizing a DI Press?
I have the Kodak Direct Suite. Running the Calibrator it images a test file to the press which
measurements are taken and entered into the software. Question is, do you read the printed sheet
or the plate? If the plate, is it removed from the press?
Just not sure how this whole process goes. Have done it plenty of times on the CTP, but the DI seems different.
Really need some feedback.
Did you just get the DI Press? The first thing that needs to be checked is that all the lasers are set correctly. Then make sure your
solids (CYMK) readings are in spec. Run your test and read the printed sheet.