Dan Roll
Senior Member

27 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   Cornishpastythighs liked post by Dan Roll On thread : Water form gear removal

   Removing the gear driving the form roller on the three roller system used on the Sakuri and removing the gear from the form roller on the KomoriMatic dampener used on Komoris accomplishes two very...

   Liked On: 05-21-2013, 07:37 PM

2. 
   John Arneson liked post by Dan Roll On thread : Water form gear removal

   Removing the gear driving the form roller on the three roller system used on the Sakuri and removing the gear from the form roller on the KomoriMatic dampener used on Komoris accomplishes two very...

   Liked On: 05-21-2013, 07:21 PM

3. 
   pworlledge liked post by Dan Roll On thread : Harris M-110 with Dahlgren water system question

   An image (patterns, screens, etc) outside the web width will do wonders in minimizing the accumulation of ink on the roller ends. Just how much image to use for best results seems to vary, I have...

   Liked On: 05-20-2013, 09:14 AM

4. 
   giant1958 liked post by Dan Roll On thread : Top Quality Printing - how is done?

   Of course, the best press and a good craftsman can only reproduce what is on the plate. If the pre-press is not top notch, the press can not make up for it.......

   Liked On: 05-06-2013, 08:33 AM

5. 
   Sev liked post by Dan Roll On thread : Top Quality Printing - how is done?

   Of course, the best press and a good craftsman can only reproduce what is on the plate. If the pre-press is not top notch, the press can not make up for it.......

   Liked On: 05-03-2013, 07:20 AM

6. 
   buckeye liked post by Dan Roll On thread : Top Quality Printing - how is done?

   Of course, the best press and a good craftsman can only reproduce what is on the plate. If the pre-press is not top notch, the press can not make up for it.......

   Liked On: 05-02-2013, 10:34 AM

7. 
   Disappointed liked post by Dan Roll On thread : Top Quality Printing - how is done?

   Of course, the best press and a good craftsman can only reproduce what is on the plate. If the pre-press is not top notch, the press can not make up for it.......

   Liked On: 05-02-2013, 09:30 AM

8. 
   Cornishpastythighs liked post by Dan Roll On thread : Horizontal streaking

   Not as intellectual a source as Saxe, but the guys on the Car Talk radio program once postulated convincingly that a group of people knowing nothing about a subject actually know less than an...

   Liked On: 03-11-2013, 08:59 PM

9. 
   Alois Senefelder liked post by Dan Roll On thread : Importance of PH and filtered water

   Tomatron is right, rapidly escalating silver prices will soon drive silver halide image plates off the market.

   Liked On: 02-12-2013, 08:54 AM

10. 
    Franklim Lima liked post by Dan Roll On thread : optimal temperature refrigeration rollers in the technotrans????

    In America we suffer from the belief 'if some is good, more is better, and a lot more is better still'. This has led to some of the printers I have worked with recently to run their ink trains at...

    Liked On: 11-30-2012, 07:29 AM

11. 
    JimBob53 liked post by Dan Roll On thread : How are our friends faring with Sandy?

    Sun Chemical, Prisco, C&W, and many other companies have their headquarters and/or manufacturing in the northern New Jersey area. I hope they all survived the storm without too much damage. The...

    Liked On: 11-06-2012, 05:03 PM

12. 
    BVulgaris liked post by Dan Roll On thread : How are our friends faring with Sandy?

    Sun Chemical, Prisco, C&W, and many other companies have their headquarters and/or manufacturing in the northern New Jersey area. I hope they all survived the storm without too much damage. The...

    Liked On: 11-01-2012, 05:27 PM

13. 
    giant1958 liked post by Dan Roll On thread : How are our friends faring with Sandy?

    Sun Chemical, Prisco, C&W, and many other companies have their headquarters and/or manufacturing in the northern New Jersey area. I hope they all survived the storm without too much damage. The...

    Liked On: 11-01-2012, 01:18 PM

14. 
    Cornishpastythighs liked post by Dan Roll On thread : Roller life - Specifically Soft duro type

    All dampeners that have a speed difference between the chrome and metering roller rapidly damage the chrome rollers due to the unceasing friction on the surface. Even though the fountain solution...

    Liked On: 09-27-2012, 09:38 AM

15. 
    Cornishpastythighs liked post by Dan Roll On thread : pH - Conductivity Meter

    I agree the Myron meter is by far the most durable and is plenty accurate enough for pressroom use, but I suggest the DS model that only measures conductivity and thew use of 'ColorpHast' brand...

    Liked On: 08-27-2012, 09:59 AM

Page 1 of 2 12 Last

• Jump to page: