5 Visitor Messages

  1. "Putting the cart before the horse is not necessarily a bad thing... when navigating a potential mine field"

    Brilliant. If you don't mind, I'd like to try and use that in one of my cartoons.

    best, gordo
  2. View Conversation
    What is best dot shape for CTP
  3. View Conversation
    Hi iam Using ptr 8300n-s Ctp & my work flow is trueflow se.
    i just want to know what is the best dot shape for ctp & plate

    tnx.
  4. Azura TS issue, From TF019

    Lukas,

    The problem is now pointing to the plate processor, we are leaving a thin coating of blue emulsion on the plate after going through the wash. This in turn has caused the pressman to turn up there water to clean off the plate. This then brings more water into the ink wells, thus the ink in the well is mixing with the water to an incorrect level, thus diluting the ink to a point where it loses it's normal tack when being applied to the paper.

    Lukas, your original comments about the tac of the ink was the correct assumption but in the other direction. The ink has been diluted to the point where it doesn't have enough tac to be applied to the sheet.
    After we hit 300sq ft of usage, we then dump the bottle of finisher. Spray all tanks of any build up, confirm all spray holes are all working, then run water through the unit. Within a dozen plates the plates start to get the same light blue film.

    Any ideas?
  5. View Conversation
    Hej Lukas, jag såg just att jag hade fått ett direktmeddelande av dig från 22/10 Vi löste de "problem" vi hade med Apogee just då men jag hör av mig om/när vi stöter på nästa.

    Ha det gott!

    / Magnus
Showing Visitor Messages 1 to 5 of 5
About Lukas Engqvist

Basic Information

Age
46
About Lukas Engqvist
Biography:
Working on Mac since the II ci, remember rip times of 17+ hours,.
Location*:
Sweden
Interests:
Like to bike offroad, something that requires full concentration
Full Company Name (Not Initials)*:
Lukas Engqvist, (artcoach.se)
Full Job Title*:
prepress & training
Company Type*:
Print Service Provider
Company Website:
www.artcoach.se
Real Name (First & Last)*:
Lukas Engqvist

Signature


Learning by teaching!

Contact


This Page
http://printplanet.com/forums/members/lukas-engqvist/
Instant Messaging

Send an Instant Message to Lukas Engqvist Using...

Statistics


Total Posts
Total Posts
1,709
Posts Per Day
0.78
Visitor Messages
Total Messages
5
Most Recent Message
04-03-2011 05:44 PM
General Information
Last Activity
07-17-2014 09:42 AM
Join Date
07-30-2008

15 Friends

  1. Armya Inc Armya Inc is offline

    Senior Member

    • Send a message via Skype™ to Armya Inc
    Armya Inc
  2. CathieH CathieH is offline

    Senior Member

    CathieH
  3. chevalier chevalier is offline

    Senior Member

    chevalier
  4. claude72 claude72 is offline

    Senior Member

    claude72
  5. DCurry DCurry is offline

    Senior Member

    DCurry
  6. FrankZhang FrankZhang is offline

    Junior Member

    FrankZhang
  7. gordo gordo is online now

    Senior Member

    gordo
  8. Gregg Gregg is offline

    Senior Member

    Gregg
  9. JasonFF JasonFF is offline

    Senior Member

    JasonFF
  10. jithu.sreekuttan jithu.sreekuttan is offline

    Junior Member

    jithu.sreekuttan
Showing Friends 1 to 10 of 15
Page 1 of 2 12 LastLast

105 Likes

Page 1 of 7 123 ... LastLast
  1. Lukas Engqvist
    Lukas Engqvist liked post by Stephen Marsh On thread : Acrobat Output Preview defaults to Adobe 1998 RGB
    Bingo Leonard! The test file was RGB PDF from Word. Setting the transparency blend space to CMYK before removing the output intent resulted in the output preview defaulting to CMYK, rather than...
    Liked On: 07-14-2014, 10:18 PM
  2. Lukas Engqvist
    Lukas Engqvist liked post by Stephen Marsh On thread : Converting to Destination in ID
    Lukas, I have not noticed the “preserve black” setting messing with images, AFAIK it only affects text/vectors (I have done difference blend tests and there is no difference for images converted...
    Liked On: 07-13-2014, 02:28 PM
  3. Lukas Engqvist
    Lukas Engqvist liked post by Stephen Marsh On thread : Acrobat Output Preview defaults to Adobe 1998 RGB
    The three EEE’s. Embrace, evangelise and enforce PDF/X standards! Stephen Marsh
    Liked On: 07-13-2014, 03:10 AM
  4. Lukas Engqvist
    Lukas Engqvist liked post by Magnus On thread : Converting to Destination in ID
    Because if you let InDesign handles color it will save you a lot of time. You wouldn't have to manually convert all your images in Photoshop. If using the colormanagenet in InDesign it would result...
    Liked On: 07-10-2014, 09:48 AM
  5. Lukas Engqvist
    Lukas Engqvist liked post by gordo On thread : Waiting for it
    http://i338.photobucket.com/albums/n408/gordonpritchard/217Waitingforit_zps7dc221be.jpg
    Liked On: 07-08-2014, 02:43 PM
  6. Lukas Engqvist
    Lukas Engqvist liked post by Cory Smith On thread : The GEC Standard
    http://media.printplanet.com/images/062-The-GEC-Standard.jpg
    Liked On: 07-05-2014, 03:45 PM
  7. Lukas Engqvist
    Lukas Engqvist liked post by pdan On thread : Word to Indesign
    Place Word documents rather than copy and paste (which would paste using the current selected ID style). During Place, Show Options If you have styled the Word file (typically not), options are...
    Liked On: 06-29-2014, 11:36 AM
  8. Lukas Engqvist
    Lukas Engqvist liked post by rotarypower3 On thread : Apogee Prepress Proofing
    Why would you want to use a "coated" type stock for uncoated proofs? With Apogee and ColorTune, I use an "uncoated" (does have an inkjet coating) style of proofing paper that passes PSO Uncoated...
    Liked On: 05-27-2014, 04:39 PM
  9. Lukas Engqvist
    Lukas Engqvist liked post by abc On thread : Crop Image Data in PDF
    If it helps you can do it easily in PitStop. Usage is normally to make the PDF file as phyically small as possible. Of course doing it then limits resizing/editing opportunities for the images,...
    Liked On: 05-19-2014, 11:46 PM
  10. Lukas Engqvist
    Lukas Engqvist liked post by Stephen Marsh On thread : Problem with verifying IDEAlliance Strip with Fogra39L (i1Profiler)
    It is late and I may be missing something, however I’ll post any way… IDEAlliance strip = 54 patches, 2 rows x 27 FOGRA wedge v2.0 = 46 patches, 2 rows x 23 FOGRA wedge v3.0b = 72 patches, 3...
    Liked On: 05-09-2014, 04:35 PM
  11. Lukas Engqvist
    Lukas Engqvist liked post by Cory Smith On thread : Striking Printshop Employees
    http://media.printplanet.com/images/208-Striking-Printshop-Employees.jpg
    Liked On: 05-02-2014, 06:26 AM
  12. Lukas Engqvist
    Lukas Engqvist liked post by gordo On thread : Macintosh - Happy 30th birthday
    This was my experience with my first MAC: The Print Guide: The Wayback View – My 25th Anniversary with the Apple Macintosh...
    Liked On: 01-25-2014, 10:30 AM
  13. Lukas Engqvist
    Lukas Engqvist liked post by kyle On thread : Anyone know how to get a Null Profile in a FreeFlow/ Xerox 700 workflow?
    A lot of machines encode their serial number, and often the time with yellow dots to aid in forgery investigations: Printer steganography - Wikipedia, the free encyclopedia...
    Liked On: 01-06-2014, 11:25 AM
  14. Lukas Engqvist
    Lukas Engqvist liked post by Stephen Marsh On thread : Grey balance test
    Yes, so far with limited testing it appears so. I have found more differences between the two, however they are approximate. One profile packages “medium” GCR is not the same as another, however they...
    Liked On: 01-06-2014, 07:49 AM
  15. Lukas Engqvist
    Lukas Engqvist liked post by gordo On thread : Grey balance test
    The test was to help the press operators understand that the SID moves that they make have little effect on the presswork. They are basically wasting time and materials. That what we're trying to do...
    Liked On: 01-03-2014, 01:12 PM
Page 1 of 7 123 ... LastLast

Sponsors

Powered by vBadvanced CMPS v4.1.2