5 Visitor Messages

  1. "Putting the cart before the horse is not necessarily a bad thing... when navigating a potential mine field"

    Brilliant. If you don't mind, I'd like to try and use that in one of my cartoons.

    best, gordo
  2. View Conversation
    What is best dot shape for CTP
  3. View Conversation
    Hi iam Using ptr 8300n-s Ctp & my work flow is trueflow se.
    i just want to know what is the best dot shape for ctp & plate

    tnx.
  4. Azura TS issue, From TF019

    Lukas,

    The problem is now pointing to the plate processor, we are leaving a thin coating of blue emulsion on the plate after going through the wash. This in turn has caused the pressman to turn up there water to clean off the plate. This then brings more water into the ink wells, thus the ink in the well is mixing with the water to an incorrect level, thus diluting the ink to a point where it loses it's normal tack when being applied to the paper.

    Lukas, your original comments about the tac of the ink was the correct assumption but in the other direction. The ink has been diluted to the point where it doesn't have enough tac to be applied to the sheet.
    After we hit 300sq ft of usage, we then dump the bottle of finisher. Spray all tanks of any build up, confirm all spray holes are all working, then run water through the unit. Within a dozen plates the plates start to get the same light blue film.

    Any ideas?
  5. View Conversation
    Hej Lukas, jag såg just att jag hade fått ett direktmeddelande av dig från 22/10 Vi löste de "problem" vi hade med Apogee just då men jag hör av mig om/när vi stöter på nästa.

    Ha det gott!

    / Magnus
Showing Visitor Messages 1 to 5 of 5
About Lukas Engqvist

Basic Information

Age
46
About Lukas Engqvist
Biography:
Working on Mac since the II ci, remember rip times of 17+ hours,.
Location*:
Sweden
Interests:
Like to bike offroad, something that requires full concentration
Full Company Name (Not Initials)*:
Lukas Engqvist, (artcoach.se)
Full Job Title*:
prepress & training
Company Type*:
Print Service Provider
Company Website:
www.artcoach.se
Real Name (First & Last)*:
Lukas Engqvist

Signature


Learning by teaching!

Contact


This Page
http://printplanet.com/forums/members/lukas-engqvist/
Instant Messaging

Send an Instant Message to Lukas Engqvist Using...

Statistics


Total Posts
Total Posts
1,710
Posts Per Day
0.75
Visitor Messages
Total Messages
5
Most Recent Message
04-03-2011 05:44 PM
General Information
Last Activity
10-20-2014 04:01 PM
Join Date
07-30-2008

15 Friends

  1. Armya Inc Armya Inc is offline

    Senior Member

    • Send a message via Skype™ to Armya Inc
    Armya Inc
  2. CathieH CathieH is offline

    Senior Member

    CathieH
  3. chevalier chevalier is offline

    Senior Member

    chevalier
  4. claude72 claude72 is offline

    Senior Member

    claude72
  5. DCurry DCurry is offline

    Senior Member

    DCurry
  6. FrankZhang FrankZhang is offline

    Junior Member

    FrankZhang
  7. gordo gordo is offline

    Senior Member

    gordo
  8. Gregg Gregg is offline

    Senior Member

    Gregg
  9. JasonFF JasonFF is offline

    Senior Member

    JasonFF
  10. jithu.sreekuttan jithu.sreekuttan is offline

    Junior Member

    jithu.sreekuttan
Showing Friends 1 to 10 of 15
Page 1 of 2 12 LastLast

31 Likes

Page 1 of 3 123 LastLast
  1. foreigner
    foreigner liked post by Lukas Engqvist On thread : ...another discussion
    Colour management in your case I would think is split into 2. First to get jobs created consistently, I would think get all jobs created to the regional standard. Second get the Output devices to...
    Liked On: 08-18-2014, 11:48 AM
  2. Stephen Marsh
    Stephen Marsh liked post by Lukas Engqvist On thread : Acrobat Output Preview defaults to Adobe 1998 RGB
    If you remove the output intent it is no longer a PDFx! P.S: BTW what is your transparency blend space, if working with print it should be CMYK, but it is possible to override it with RGB. I...
    Liked On: 07-15-2014, 03:07 AM
  3. Chasfinch
    Chasfinch liked post by Lukas Engqvist On thread : Help me explain pdf problem
    @leonardr Feathering always produces rasters/raster mask (raster image in a clipping group) irrespective of PDF version at least up to and including PDF1.7.
    Liked On: 07-08-2014, 05:59 PM
  4. gig0
    gig0 liked post by Lukas Engqvist On thread : free imposition??
    I'm really impressed with the value for money that you get from Easiest Ever PDF Imposition Software for Digital & Offset Printing Presses (http://www.devalipi.com/moreinfois.html) Been looking into...
    Liked On: 07-05-2014, 10:04 PM
  5. giant1958
    giant1958 liked post by Lukas Engqvist On thread : Apogee Prepress Proofing
    From my experience AGFA are good at listening, but you should go via the Apogee forum to give feature request.
    Liked On: 05-29-2014, 09:33 AM
  6. Cold
    Cold liked post by Lukas Engqvist On thread : About RE: Print
    I just love that you managed to get a ":P" in the title, don't know it it was happy coincidence or planned. But letts just assume it was a stroke of genius :)
    Liked On: 01-02-2014, 05:41 PM
  7. robal
    robal liked post by Lukas Engqvist On thread : How to resize a PDF?
    there is an export but it's called "save as…" and look at more options. But don't know why you would want to… normally this kind of thing is done in imposition software.
    Liked On: 11-12-2013, 11:13 AM
  8. KamilT
    KamilT liked post by Lukas Engqvist On thread : Color Accurate Web Based Soft Proofing - Good Idea or Bad?
    Don't forget that some monitors also have big variation in colour depending on view angle, even if calibration and characterisation is perfect.
    Liked On: 09-28-2013, 02:42 PM
  9. Sev
    Sev liked post by Lukas Engqvist On thread : P A N T O N E Thoughts on 9/11
    Not to argue with what is said, but to share from a practical point of view: The biggest problem with pantone is the lack of education (or rather the stuck up attitude of design houses) that lack...
    Liked On: 09-12-2013, 07:36 AM
  10. Tpyo
    Tpyo liked post by Lukas Engqvist On thread : Creative Cloud thoughts
    All CC subscribers will have access to CS6. If you are "just" outputting then it is tough with a CC account as well… there is the option to ask for print ready PDF's but we all know that customers...
    Liked On: 07-20-2013, 10:21 AM
  11. jonteo
    jonteo liked post by Lukas Engqvist On thread : How to tell if a CMYK build printed as requested
    Do you want the colour or do you want the values? Very rarely can you have both. Going only by numbers is like boiling an egg by a clock… as long as you are exactly at the same altitude it will be...
    Liked On: 07-05-2013, 04:15 PM
  12. gordo
    gordo liked post by Lukas Engqvist On thread : How to tell if a CMYK build printed as requested
    Do you want the colour or do you want the values? Very rarely can you have both. Going only by numbers is like boiling an egg by a clock… as long as you are exactly at the same altitude it will be...
    Liked On: 07-05-2013, 03:50 PM
  13. kala
    kala liked post by Lukas Engqvist On thread : Pagemaker font missing
    What font? I remember (vaguely) that there was one or two fonts that needed to be uploaded to RIP, (or available in Distiller). Can't remember the fonts though. Don't have any PageMaker compatible...
    Liked On: 07-05-2013, 01:32 AM
  14. Phish
    Phish liked post by Lukas Engqvist On thread : CMYK prints the same on every printer!!!
    Neither Pantone nor CMYK is complete without the output intent. The problem is an educational one, and this is one reason I moved from production to education. But (many) design schools (possibly due...
    Liked On: 07-03-2013, 07:35 PM
  15. Armya Inc
    Armya Inc liked post by Lukas Engqvist On thread : Bad email habits you need to break
    Not sure if I agree with attatchment over 6 paragraphs (don't know I write that many). But I find it irritating to have unnecessary attatchments when it could just have been included in the body of...
    Liked On: 07-03-2013, 12:26 PM
Page 1 of 3 123 LastLast

Sponsors

Powered by vBadvanced CMPS v4.1.2