UnlimitedBT
Senior Member

Hi Unlimitedbt,

I read a reply from you regarding the okidata fuser issue leaving embossing seams and how to resolve that issue by adjusting the springs turning the springs counterclockwise. I too am having an issue with my okidata 9600 in regards to this situation. Can you explain to me more in detail how to get to the springs in side the fuser unit for I noticed there are about 6 screws altogether on the outside of these units. I would greatly appreciate any advice you may have on this topic for we are trying to get this resloved once and for all. trutrack

Hi, I really don't have a serious expirience on usage of these. I mean I do get the accasionally for sale but getting a HQ print.... Sorry. PS Driver, highest quality would be my guess but you allready did that. Sorry I can't be much of the help.

Hi UnlimitedBT,

I recently was able to buy a really low used ES3640e GA (700 prints!) and a C9800 (6000 b/w prints) (both with EFI built in), but am struggling with decent photo printouts from indesign... Also, i did not receive any driver cd's thus leaving me with the drivers i can find on the net... Also no RIP software in use, since for my tiny company this is a budget overkill for now...
I was wondering with which settings i could achieve the best photo printout? It seems that the photo prints are not crisp and clear even at Photoquality level in the PS driver... Fonts and colors print out nicely. Also in the PS driver i use DOT-setting for printout... Do you know what i could do to improve this?
Thankx for your help.
Greetings from Belgium,

Thierry (rayd8)