Results 1 to 4 of 4
  1. #1
    Louisms is offline Junior Member
    Join Date
    Jul 2012
    Location
    Dublin
    Posts
    1

    Unhappy POLAR 66 Manual Needed

    I'm in a bind!
    I need a workshop / parts manual for a Polar 66 Guillotine.
    Can anyone help?

    Thanks!
    Paul
    Dublin

  2. #2
    Buntpapier is offline Junior Member
    Join Date
    Aug 2012
    Location
    Ukraine
    Posts
    25

    Default

    I would try to find former POLAR service engineer from the Heidelberg agency Millers. Some are on there own now.
    Buntpapier

  3. #3
    jimnick44 is offline Junior Member
    Join Date
    Aug 2012
    Location
    Michigan
    Posts
    1

    Default

    i have an electronic version. you can email me at jimnick44@yahoo.com

    Jim Nicholas
    Director of Operations
    Batson Printing
    Benton Harbor, MI

  4. #4
    Buntpapier is offline Junior Member
    Join Date
    Aug 2012
    Location
    Ukraine
    Posts
    25

    Default

    There is more than one 66 version. This go’s by software version and machine configuration:
    66 V1.2
    66 V1.3
    66 V3.0
    66 V4.0
    and 66X
    In North America and Europe the operating manual has to fit to the machine because of safety requirements. If the knife change explanation is not the correct one the operating manual is not good.
    For normal programming it will work not in all cases as well. During 15 years of selling the 66 many things are changed.
    Buntpapier


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Sponsors