Imposition

[Ruffy]

Hi! I am using Xitron Navigator 8.1. Does this rip have an imposition that will image CMYK in one film only? As of now it is only capable of CM or YK or just 2 colors in one film by using imposition up or accross. Thanks in advance and GODSPEED!!!

[petarbitola]

Hi! I am using Xitron Navigator 8.1. Does this rip have an imposition that will image CMYK in one film only? As of now it is only capable of CM or YK or just 2 colors in one film by using imposition up or accross. Thanks in advance and GODSPEED!!!

Did you try to put serial for "Simple Imposition". If you no, here is a number.
In section Simple Imposition put this number 4215646 and I think will be OK.

[WiseGuy]

Hello. First, what imposition product are you using? Simple Imposition?

More than likely, it's not your imposition software... most do not do separations. They work with the type of file you bring in. Import a composite PDF, get a composite out. Import a preseparated file, get a preseparated file out. Or spot in, spot out.

So, if you're looking for a way to image your CMYK/RBG file as a composite on your RIP, I would talk to Xitron about settings on the RIP. I'm sure someone here can chime in and let you know.

Otherwise, if I'm misunderstanding the issue and you're using one of our products (inpO2 or Dynastrip), drop me a note to my main email address michaelr@dynagram.com, and we'll see what we can do to sort it out.

I hope this was helpful and again, don't hesitate to write or call.

Michael Reiher
Director of Sales and Marketing
Dynagram

[Ruffy]

Thanks. I will try. I hope it will work!!!

[Ruffy]

Did you try to put serial for "Simple Imposition". If you no, here is a number.
In section Simple Imposition put this number 4215646 and I think will be OK.

Where can i find this "Simple Imposition"? So i can try to input those numbers... Thanks in advance.

[Ruffy]

petarbitola: I already try those numbers but its still disabled....

[petarbitola]

petarbitola: I already try those numbers but its still disabled....

First you must stop the RIP, then you go to "navigator" menu, choose "Configure RIP", then choose "Extras...", in Extras choose "Simple Imposition", then choose "Add" and type licence number 4215646. Close all menu. Go to "Output" menu and choose "imposition manager" and with "copy" menu choose any listed option, then make your setting, then save as with your name.

Select any option that will responds to your needs and first try with smaller formats, so when you're sure, use that option to your actual needs.

[Ruffy]

First you must stop the RIP, then you go to "navigator" menu, choose "Configure RIP", then choose "Extras...", in Extras choose "Simple Imposition", then choose "Add" and type licence number 4215646. Close all menu. Go to "Output" menu and choose "imposition manager" and with "copy" menu choose any listed option, then make your setting, then save as with your name.

Select any option that will responds to your needs and first try with smaller formats, so when you're sure, use that option to your actual needs.

I already tried it but after closing the tabs that you said... and open it again.. the simple imposition is still disabled.... I use Xitron Navigator 8.1

[VladCanada]

1. Guys, all keys (or numbers) are generated with usage of a special algorythm, based on RIP serial number, so... no any other "lucky numbers" could be good except your own.
2. That's illegal to share such a kund of info at open forum.
3. Is it still available in Nav 8.1 : Page Setup Manager --> Edit Page Setup -->In Processing window mark checkbox at Enable Feature --> Fill Film ???

[Ruffy]

1. Guys, all keys (or numbers) are generated with usage of a special algorythm, based on RIP serial number, so... no any other "lucky numbers" could be good except your own.
2. That's illegal to share such a kund of info at open forum.
3. Is it still available in Nav 8.1 : Page Setup Manager --> Edit Page Setup -->In Processing window mark checkbox at Enable Feature --> Fill Film ???

I have the original cd of xitron nav 8.1 including the dongle... Before a technician configure it so I know that simple imposition is activated but after i Format my pc and installed the Nav 8.1 the simple imposition is disabled... I just want to know how can i enabled it... Just want help SIR!!!!