Results 1 to 5 of 5
  1. 07-18-2011, 08:35 AM #1
    dmrivet
    dmrivet is offline Junior Member
    Join Date
    Jul 2011
    Posts
    16

    Default Presstek Anthem Water Wash won't start.

    I have made sure the power to the machine is not disrupted and it was on and the e-stop was off. The washer just won't turn on. Any ideas? Googling this as I stand by.
    Reply With Quote Reply With Quote
  2. 07-19-2011, 08:39 AM #2
    JLRobertson
    JLRobertson is offline Member
    Join Date
    Nov 2009
    Posts
    31

    Default

    Will it cycle if you turn the main power off, and then back on? The plate sensor on the feed-in lasted about a month in mine.
    Reply With Quote Reply With Quote
  3. 07-19-2011, 11:12 AM #3
    Captweez
    Captweez is offline Junior Member
    Join Date
    Apr 2009
    Posts
    20

    Default

    Check the water level in the first tank, and if it seems alright, jiggle the sensor float. Sometimes they get stuck.
    Reply With Quote Reply With Quote
  4. 07-20-2011, 08:02 AM #4
    TheProcessIStheproduct
    TheProcessIStheproduct is offline Senior Member
    Join Date
    Aug 2009
    Posts
    159

    Default

    also check e-stops with multi-meter, sometimes they stay open, I had to un-hook one that was acting up...
    Reply With Quote Reply With Quote
  5. 07-28-2011, 03:02 PM #5
    dmrivet
    dmrivet is offline Junior Member
    Join Date
    Jul 2011
    Posts
    16

    Default

    I found the problem. A wire came off on the emergency stop. All fixed now. Thanks guys.
    Reply With Quote Reply With Quote

« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Sponsors

Esko Sponsored Content

WhatTheyThink Sites