PTR-4300E error :5167

[skumarswarna]

Dear Friends

In SCREEN PTR-4300 CTP error message 5167 coming and plate is ejecting .

Ex167 : The drum is rotated to the "squeeze position", but the status of the Servo controller
(SVC) has not changed to "Ready".

Any suggestions to solve this can be appreciated .



With thanks

[Greg G]

Apparently this error can only be generated during a drum test. It could be that the drum position needs adjusting through the service menu. Try doing an actuator test or drum test to see if the squeeze roller is giving the problem. The service menu is password protected, I don't know what it is for the PTR-4300, have you checked with your tech support?

[gatoseg]

I need service manual for Screen PTR 4300, E, S please help me.
gatoseg@yahoo.com

[gatoseg]

I need service manual for Screen PTR 4300, E, S please help me.
gatoseg@yahoo.com

[zombie]

I need a BMW 760IL, please help me.

[KimSaks]

Call
Team EPS
(859) 371-5120
They are the premier Screen service company in the US.
They may be able to solve your issue by phone or send someone to repair onsite.
Tell them "Kim" referred you.
KJ Saks kimsaks619@aol.com 702-561-5936

[Raymond Ramirez]

I am a certified screen technician. I can tell you that no one will provide you with a manual. This is against the signed document every technician signs before getting certified. I can assist you... this could be more than just a squeeze roller issue. It could be that the information from the drum is not telling the servo it is ready or even the servo is not telling responding to the information. email me and I might be able to help. Just by listening to the loading procedure we might be able to accomplish a repair

techray1@live.com

[skumarswarna]

the problem is rectified . The drum base position is distrubed . re adjusted the Drum base position .now working fine .