Search:

Yes we had the service people replace the meter and it worked great.

Depends on how you have Illustrator set up. If it is set to be safe CMYK (preserve numbers) then no ICC profiles are used, except those involved in print dialogue. If honour all profiles is your...

I would not expect them to print the same in two different printers. If it was 0/95/90/0 in Fogra39 simulated on different printers then you would be able to assume results to be similar, but even...

Ouch, remember you said about that one, wasn't able to reproduce that bug :(

Neither Pantone nor CMYK is complete without the output intent. The problem is an educational one, and this is one reason I moved from production to education. But (many) design schools (possibly due...

Would like to know what bugs those are, and to have several users confirm the bug raises the priority to get it fixed. There is the official bug/feature forms, and I have found Adobe responding...

It has to do with right and left pages. You can uncheck from the page panel fly-out "Allow pages to shuffle". Alternatively you need to lock down the left and right pages by creating a section at...

All CC subscribers will have access to CS6. If you are "just" outputting then it is tough with a CC account as well… there is the option to ask for print ready PDF's but we all know that customers...

:) Ok. In the end it's about trust between departments.

With the problems you describe are you really ready for FM? If I were you I'd spend some time on Gordons blogg (The Print Guide)

As Gordon implied you misunderstand me. When I say don't show the...

There was also no mention of print under "publish" in the keynote slides :,(

Best thing is if the pressman doesn't see the proof ;) They should be able to print by numbers. Matching wet ink to proofs isn't a good idea, I know customers that have been shown the same sheet 15...

Don't forget that some monitors also have big variation in colour depending on view angle, even if calibration and characterisation is perfect.

Thanks Gordon, I sometimes fall into talking about dot gain when I mean TVI.

Prepress cannot in any way affect the solid primaries and secondaries.

Dot gain can needs to be established as a jonint agreement between prepress and press since it depends on press conditions...

If working in prepress you need to blow out the fonts every now and again. You can have a suitcase with a mix match font set that gets in the way of installing families. The most common fonts are...

Long time ago there was similar issues caused by cache cleanup removing "unused" fonts… and then the fonts were not as "unused" as they seemed, the system doesn't clean up the Adobe font list so the...

Sad that it seems to be such a trouble. Have you tried re-installing? Uninstalling, emptying trash restarting, check permissions then do a re-install? I have not had any issues or heard of this kind...

I'd visit gwg to get the configuration recommendations for your workflow.

I'd really recommend VIGC Output Essentials it helps you walk trough the PDF creation flow. It is allways best to make sure you have document and output profiles as the same. AND enable warnings for...

Shouldn't rendering for images and vector be identical since the concept of transparency was introduced? There is no reason to handle images and vectors differently. We don't know when they are...

Why not take this weeks special offer of trial on lynda up… lock yourself in a room with internet and sponge up all the knowledge 24/7 (the trial is for a weeks subscription)
lynda.com Online...

Have you tried unsinstalling esko to see if that could be the preoblem? Important to know if it is Adobe or the plug-ins causing this? Do you have any productivity tools enabled in your operating...

Sorry i didn't see this yet… are you sure that you been working in the right layer?

I usually explain that standardisation is to align a machine/process to a standard so that printed results will be similar in different print plants.

Profiling is what a printer does for the...