Results 1 to 5 of 5
  1. 03-02-2011, 03:01 PM #1
    Turbo
    Turbo is offline Junior Member
    Join Date
    Mar 2011
    Posts
    6

    Exclamation Komori Coater overload

    can anyone recommend a electrical mechanic to help us with an overload problem on our coater unit?
    Reply With Quote Reply With Quote
  2. 03-02-2011, 03:01 PM #2
    Turbo
    Turbo is offline Junior Member
    Join Date
    Mar 2011
    Posts
    6

    Default

    we have a Komori 526 with coater it works but runs hot and over loads all the time!
    Reply With Quote Reply With Quote
  3. 03-21-2011, 10:47 PM #3
    David Schroeder
    David Schroeder is offline Junior Member
    Send a message via MSN to David Schroeder
    Join Date
    Sep 2009
    Posts
    7

    Default

    What model press is it? L40 or L26/28
    Reply With Quote Reply With Quote
  4. 03-22-2011, 08:07 AM #4
    Turbo
    Turbo is offline Junior Member
    Join Date
    Mar 2011
    Posts
    6

    Default komori

    we have an L26 5 + coater 1991
    Reply With Quote Reply With Quote
  5. 03-22-2011, 10:00 AM #5
    David Schroeder
    David Schroeder is offline Junior Member
    Send a message via MSN to David Schroeder
    Join Date
    Sep 2009
    Posts
    7

    Default

    Where are you located? I may be able to recommend a technician.

    Otherwise, check the three phase voltage into the motor amplifier, it should be no less than 200 voltss on all three phases. If ok, remove the drive motor and check that the pan roller turns free. The problem could be with a bearing in the press or motor.
    Otherwise, the amplifier could be at fault.
    Reply With Quote Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Sponsors

Esko Sponsored Content

WhatTheyThink Sites