AB Dick Question

[RoyBoom]

I'm new here, and found this place in a search for a forum where I could ask some questions. I've been printing on an AB Dick 360 for 30 years, but the thing is getting pretty tired. A few months ago I picked up an 8920 with a T-head, Crestlines, some fancy spray outfit, and an IR dryer. The only problem is I've never run one like this.

My first question is on the T-head. I see that there is a wire that needs plugged in coming from the head to a box by the feeder section. I just want to start out running as a one color, but I'm not getting the thing to power up, and I suspect it is because that thing isn't plugged in. How do I get the press to power up with the T-head swung back out of the way? I've read the T-51 operator manual, but I'm not seeing this part in there.

Any help in getting me started is appreciated.

Roy

[UnlimitedBT]

Hi. Most likely connector has something to do with "Cover open" safety circuit. You should call any press parts store and ask if there is a bypass plug exist. Also if you are a friend with anyone who is comfortable with electronic / electric stuff - he can help. I would, personally, install a switch "Thead" or "No Thead" closing the circuit within the press or with Thead.
Where are you located?

[BillJ]

There should be a safety cover that goes in place when the T head is out. that should make an interlock switch that will allow the press to work.

[RoyBoom]

Your replies pretty much agree with what I thought the problem was. I'd bought this press at an auction, and from what I can tell I got a real steal on it. The only problem is that there are a few missing pieces. I'll have to make some calls and see if I can find a plug to go in there, and I'm also missing the wrench for hooking up the T-head, and I think there is a piece I need to plug in and adjust my up and down and skew. Still, I can replace those and still be on the good side. The machine came out of a large inplant and I know they took good care of their stuff, it it looks just about like new. I got it for $520, so I think I'll be ok.