Results 1 to 2 of 2
  1. 01-26-2012, 12:28 PM #1
    speekn
    speekn is offline Junior Member
    Join Date
    Oct 2011
    Posts
    1

    Default Any success w/ 4/C process on white ink w/ WT7900 metallic?

    I know that Epson doesn't claim that 4/C process ( on white ink ) will be accurate on their metallic substrate, but we need to get as close as possible. Any hints or tips would be greatly appreciated. Manual curves for individual jobs is not an option. Thanks in advance! Also curious how many WT7900's are out there...?
    Last edited by speekn; 02-03-2012 at 10:27 AM.
    Reply With Quote Reply With Quote
  2. 01-26-2012, 02:51 PM #2
    Stephen Marsh
    Stephen Marsh is online now Senior Member
    Join Date
    Apr 2009
    Location
    Sydney, Australia
    Posts
    581

    Default

    I would create an ICC profile for the colour on white base printed on metallic film.

    Do you also need to simulate spot inks on white on the silver, or just four colour?

    What RIP are you using? Does it allow you to lay down more white ink density or are you at max. anyway (or perhaps this is not a contributing factor)? If you print white down with no other colour on top, how well does it bond to the silver and how dense is it?


    Stephen Marsh
    Reply With Quote Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Sponsors

Esko Sponsored Content

WhatTheyThink Sites