Recent content by akiyama_king

does the suction roller move when you try and move manually from the delivery panel

it does sound like it is just out of sero, are you sure the hand terminal was at active when you zeroed,

sounds strange that it moves ok with the hand terminal but not alone, but just to clarify when you say it gets stuck does it move at all to a point and then get stuck or does it just stay in the maximum or minimum position?

when you Zeroed it with the hand terminal did it go to the biggest sheet size and then to the smallest ok or did it get stuck?

it might not be the motor, If you dont size up and down very often there is a cover over the shafts that the Suction rollers move along sometimes the get stiff and stop it moving, so spray with silicone and try moving the covers by hand front and back afew times and see if it helps. do the...

yeah it is a bad refelection on the but i doubt it is necceserily a reflection of the food.

I doubt a takeaways menu being out of register is actually a reflection on their food

I assume you dont know what i mean by work in turn? Work in turn means you Have one half of the sheet with the front and the other half with the back so you only need one set of plate, Business cards can be done d/s with one set of plate, as can anything that is half or less than half the...

I understand what you mean, About the Double sided work the impression im getting from the type of work your doing is most of it will go work in turn so that you only need one set of plates I could be wrong as it all depends on what end size most of your work is

hi scot i have never run digital nor DI but, According to how id callculated it according to the post above its Less than $40 for Plates , Ink as far as i am aware is just similar to conventional ink and although it depends on image the cost for ink for 1000 sheets will be nothing like what your...

Do you run alot of heavy board?

Thats Good To hear, I would have thought it would be very bad on 100Gram so i think your problem is pretty much gone...Well Done

Any Luck yet Johny?

Bill, Rotek and Samzon seems to be OK, if your buying new i wouldnt Really buy the Air Blast Option as i doubt you will use it, Some may disagree... What heidi Do you have that you want to add a perf to?

Just out of intest Alois, do you work for polestar?