Recent content by CLD

That would be great. I know someone has solved this problem, just having trouble finding who and how they did it. I've got a tech from Ricoh in tomorrow to address this and several issues we've been having since the install. I did run a test and re-assigned the paper not using any of the paper...

I ran a test with the tabs set to duplex, but leaving the backside blank. No increase in speed. I've set the file up both ways to see if one was faster than the other. The first way we're running the tabs as 9x11, simply telling the printer to pull a different size sheet every now and then...

All pages are duplex except for the tab pages, which are simplex. We used the paper catalog to define each of the 2 paper stocks so that everything would be the same. We simply changed the size and renamed. Will try your suggestion tomorrow, but would love to hear any other ideas you might...

Thanks, Erik. We've got both trays set to the same weight - gsm 256, which I think in the interface is Weight 5. That's the recommended setting for the cardstock so we matched the paper. We also ran a test with both trays set to a lower gsm, with no increase in speed or decrease in the delay...

We're running manuals on our Ricoh C7110. Each manual has 10 tabs (2 banks of 5). There is a 7 second delay in printing every time the machine prints one of the tabs. You can see how this slows down the process. Here are some details about the project, and what we've tried so far. 8 1/2" x 11"...