Recent content by TRYYZ

I have 2 spare dongles, but would have to see if they are sellable also.

I believe all you need is a tiff catcher, and a rip to create the 1 bit tiffs

Hi Shanew, have you tried the deep clean cycles ? You can access them by powering down then power back up holding down the "+" "-" and enter button at the same time, hit the "Select type " button until you come to Check: Clean hit Enter, there are three choices for cleaning KKO, KK1, KK2, KK2...

That was just a screen shot to show what happened, Command,Shift,4 and Marquis the area, it was just to see if any one had seen it before. Thanks

Hi All, Just wondering if anyone would have an explanation for Indesign CS6 substituting some weird characters whenever an "il" or "io" was in a word side by each, have a look at the attached pdf and let me know what you think. These were substituted after changing some dashes to dots in a...

It seems Preps 7 is very similar to Preps 6, so those You Tube videos might be of some help.

Check out You Tube for instructional videos, although I'm not 100% that Preps 7 has been released

Does anyone know what the registration tolerances are back to front on a C6000 running a 12 x 18 sht, it is a quality 80lb C2S stock. The overall image is skewed and when it flips, it is out double, makes it about .125 out at both ends. Or is there an adjustment to reduce the skew. The tech...

Has anyone else had issues connecting this Prinergy version with the Fiery driving a KM6000 Bizhub, Prinergy can see the shared "hot folders" and "virtual printers" but when you hit the send buttons through a process plan to either or the pages go into oblivion, nothing shows up in any Print...

I would assume you would have to enter that data "plate sizes, grippers, sheet sizes in Signa Station, "build profiles according to your shops specs". I am a Preps and Pandora user not familiar with Signa but I would find it unbelievable if that wasn't the case. Call your Signa rep and ask him.

Hi goose, Have you checked that there are no Custom paper settings for that particular tray set in the bizhub interface, although it says 8.5 x 11 if it is set to a Custom size setting it will not print. Hit the standard paper size for that tray and let the machine figure it out. We were caught...

Try this it works for us like a charm Number Press - The #1 Numbering Software Worldwide! $80.00 Cheers TRYYZ

We used to use a company called Ever-Reddy Packaging in Toronto, ask or Jack, 416 293 1961 Creo Renaisance Scanner Hope this helps Tom

Heeeeeeelp !!! Heeeeeeelp !!! Hi Out There, Is there still anyone out there still willing to share the shareware, maybe upload it to an ftp, where I could pick it up or upload it to my ftp. Thanks, Tom [email protected]

OSX 10.5.8 and CS5 OSX 10.5.8 and CS5 Has anyone had any issues using CS5 on an Intel mac running OSX 10.5.8 Cheers,