Search results

Thanks Keness, so that also means I could use DC12 toner to refill DC5000 toner right?

Reviving this old thread from the dead.... DocuColor 5000 toner, is it the same as Docucolor 250 toner? Since the cartridges look so similar (and so does the machine, for a large part) I would guess so, on the other hand I think the fuser is oil based, suggesting the toner would be different.

I have most developer in stock, next time I do a replacement I will make sure to read the weight!

Thanks. Does this also mean that the developer for all EA-HG machines is the same material (I realize the quantities are not the same)?

Realizing this a old thread but here goes: does anyone know what the material in the WorkCentre 7132/7232/7242 is? Is this EA-HG as well?

Tried to clean de developer trickle port, but couldn't find much there. I opened developer and used a toner vacuum cleaner to clean excess material and the metering blade, but with no effect at all. I've attached 2 close-up pictures of the defect. Does the developer still look like the problem...

I'll look into that as well, need to take out the developer anyway, thanks!

Thanks for the tip, but I doubt it since it has been changed along with the drum unit. I got a suggestion to look at the developer trickle port. I'll post here what the outcome of that will be. Meanwhile other suggestions are of course welcome!

I have a Xerox 4110 that gives a double dark line perpendicular to the print direction (see attached image): - replaced the transfer belt - replaced drum - replaced belt cleaner - replaced fuser heat and pressure rollers The defect does not show up on every page, i does so about every 4-5 A3...