Search results

Hi all We have a Lotem 800 year 2003. We have an illegal plate size error.The carriage belt was very loose and we have tensioned but still the error occurs. We can go to the motors and type in 1030 and it goes to 1030 on screen but is about 10mm to big. It looks to me like we need to calibrate...

Hi All We have a Man Roland 306 we are trying to get up and running with an Error 90 something to do with CPL i think. Anybody out there have any idea what this is? Any help would be appreciated. thanks

Hi All Anybody have any idea as to why our plates are 1.5mm off centre from side to side ( tick to edge of plate) Is there an adjustment we can make to maybe the centre pins?? Thanks all

Hi All Our Lotem 800 V has developed a noisy fan (its in the left hand door as you look at the plate cassette) I can see the fans 2 of them i think! but how do you access them? i want to either replace or lubricate Any help would be appreciated Many Thanks

Hi All We run a Man Roland 704 1995 and have a problem upon start up When we power up in the morning it goes through its motions and then shuts down and the green lights go off , although the monitor stays on and usually reads the below message Failure of SPS SPS-BUS Failure of SPS SPS-BUS No...

Hi All Anybody got a rough idea what the value of a Heidelberg QM 46 Di 4 col classic is worth? Think the year is 1998 and about 6.5 million on the clock thanks in advance

Hi All Anybody out there know how to tell if we have a failed laser on a Lotem 800V We are experiencing lines on the plates which show up on the print we have slowed down the drum speed which has helped In the expose params box when we are exposing a plate it reads Active Diodes 24 (0-23)...

We are using a Lotem 800 V and are finding lines on the plates. I have attached a pic. There have been similar threads on here but i cant find out how they were resolved. The faster the drum speed the more intense the lines are (900rpm) We have changed the V pads, silicone oiled and cleaned the...