Search results

it was bad blankets from the company we buy them from they bought everyone back from us . THanks for all the help guys

i have replace a few of these and the bushing anyone know of a easy way to get the gear side ones out with out climbing in the unit and taking a cold chisle to them ? i made tools to put both in easily witch i would gladly share pics of if anyone is interested

Easy easy easy Easy easy easy first make sure you have the correct tools T handle for the u bold and a 14 inch wrench and we always PB blaster them first and let it sit . First shut the lock down with the plate off you will see two little square headed bolts you want to tighten them...

we do a quarterly bleaching of the whole water system just to keep the algae down .

we currently have Mchugh blankets and we have also tried another blanket company on a community press . Here is the issue they blankets are lasting a day to 3 days at best . we wash them every day with the recommended blanket wash from the company . currently we pack them with mylar one 10...

it seems as this summer has come along that it has changed we would get a little here and there but now in the black if you dont clean the water stop it really starts throwing ink

My manager has opened the books on cost the last year if we need it it is ordered from parts to rollers to new paper .. he finally has a person from US ink coming out to take a look at what we have going on . with the rollers settings i have a infrared Temp gauge Whats normal temperature ? i...

Where to start .. having one heck of a time getting ink water balance down .. i have 2 years experience running this press i have never even seen a press before the day i have started i have some training about two weeks . Mostly learn as you go or ask the guy with 18 years experience who...

Tony Goss Community (11 units ) press operator . smaller print shop owned by a big company . i have 2 years experience with a press . If asked 5 years ago if what i would be doing i would have never guessed a press operator . but i love what i do and i like the place i work ..

check the hardness of the rollers / stripes of the micro roller and your ink forms

We had the same problem what was found is that we had fungus growing in our system caused from the fountain chemical . we bleached the system once then went with a different type of fountain solution . this happens with neutrals from what the rep told us .