Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Kodak Nexpress and Lamination

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kodak Nexpress and Lamination

    We have a Kodak Nexpress, often times we laminate the product that comes off the machine. Our buyout vendor uses a thermal lam and in the past week we have had issues with delamination, it was on heavy coverage. It has been proposed that we should run the sheets that come off the Nexpress down one of our offset presses to put an AQ on the sheet, this suggestion was by the vendor. However we have run lots of jobs that got laminated in the past and we have not had an issue. We are wondering if the cause is the Nexpress or possibly the laminating vendor. Does anyone have some insight with this issue. Any suggestions would be appreciated.

  • #2
    laminating temperature may be one issue run slowly or check the fusing common problems heavy coverage sheets

    Comment


    • #3
      I'd call Kodak.

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)CanonKBATharsternAvantiXerox

      Presswise Article

      Collapse

      Automated Order Status Tracking
      In PressWise Workflow Solution


      Presswise order status
      Quick overview of the order status tracking feature on PressWise’s automated workflow solution

      Link to Video

      CanonDuploStandard Finishing4OverSmartsoft (Presswise)Xerox

      What's Going On

      Collapse

      There are currently 6217 users online. 107 members and 6110 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X