Standard Finishing


No announcement yet.

C75 prints on heavy stock paper comes out messy

CanonKonica Minolta
  • Filter
  • Time
  • Show
Clear All
new posts

  • C75 prints on heavy stock paper comes out messy

    Good day we have been having this problem a while now where our C75 when running like black on stocks over 100LB with heavy concentration of black the print comes out like it's not been fused well to the paper
    liek the registration is off the print look like smeared paint and the machine is dirty
    I checked the fuser it's up to all (0)
    Not sure what to try next

  • #2
    Look at your secondary transfer voltage. That my need adjusted.


    • #3
      Thanks. Seeing I'm new to this can you point out where this is. For sure I have a tech but he's not trained in this machine but over the past year has done really well in resolving issues Thanks


      • #4
        In your custom paper setup.

        If it is not fusing correctly if will flake or scratch off. If it is not transfer to the paper correctly it will look motley or like pin pricks depending if the voltage is too low or too high.
        Last edited by DYP; 07-05-2018, 08:00 AM.


        • #5
          Oh ok awesome
          will try get down to the shop and go in there
          So I'm guessing you log in via the admin mode and go to common settings then maintenance etc?


          Unconfigured Static HTML Module


          Static HTML Module Content
          4OverStandard FinishingDuploSmartsoft (Presswise)CanonKBAUltimateTharstern
          CanonDuploStandard Finishing

          What's Going On


          There are currently 4554 users online. 115 members and 4439 guests.

          Most users ever online was 6,597 at 10:25 AM on 04-20-2018.