Xerox Versant 180 Cyan drop out

Chewbarka

Member
Hello Everyone
Why would the cyan just stop working? We replaced the drum and vacuumed everything. Cyan is getting toner.
We did run the cleaning wand as well. We also switched drums with another color with the same results. We believe the drum is turning.
Could the laser have gone bad?
Frank
 
Did the other color fail, or was the cyan still failing when you switched the drums? Perhaps you forgot to remove the small cover on the drum that is above a spiral foam thing?
 
Could be developer/housing or the laser. Could also be the cyan drum drive/motor.
 
Last edited:
Could be developer/housing or the laser. Could also be the cyan drum drive/motor.

We have had the developer housing replaced a few times over the years as well as the drive motors for it. Not sure if it is common for others but has been common for us, think it has all been fully replaced for each colour.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top