Standard Finishing


No announcement yet.

Konica minolta c-8000 doubling issues

  • Filter
  • Time
  • Show
Clear All
new posts

  • Konica minolta c-8000 doubling issues

    Hi, I am having issues with my KM 8000, When running either 4/4 or 4/0 out of any tray I am getting serious doubling it start's approx 1/4 way down the sheet. Also periodically the sheet will put like a z fold half way down the sheet sometimes causing a jam and sometimes allowing the sheet to be sent all the way through the machine. When the paper jams it look's like it is when the sheet has just entered the fuser. If anyone has had these issue's or have any idea what the problem could be if they would kindly reply it would be much appreciated before I start buying new part's that will not solve my problem. Many Thanks

  • #2
    Best advice for you is to get rid of this monster... It will consume you... Get a C1060 or C2060 for much better results... I've seen quite a few shops get trapped by this troublesome machine...


    4OverCanonKBAAvantiXeroxSmartsoft (Presswise)Duplo

    Free Download


    Print Embellishment Goes
    Straight To The Bottom Line

    See how your company can eliminate “Lowest Priced Bidder” from your pricing equation Download the Free White Paper.

    CanonXeroxSmartsoft (Presswise)Duplo4Over

    What's Going On


    There are currently 4732 users online. 96 members and 4636 guests.

    Most users ever online was 6,855 at 12:33 PM on 06-06-2019.