Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Ricoh C9200 Question

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ricoh C9200 Question

    We are in the process of getting a Ricoh C9200 installed and a salesperson had this question:
    If I'm using a 300 dpi image at 100%, or a 600 dpi image (or larger) at 100%, will you be able to tell a quality difference on the C9200?

    I have this question out to our Ricoh rep and one of their analyst....but figured I would put it out here too. I'm sure they'll have an answer for me tomorrow.

    Thanks

  • #2
    I would say yes. While there are rapidly diminishing returns as you go over 300 dpi, I think 400 dpi would be recommended. That is what we use thought the average person isn't going to see the difference. Anything over that is a waste in my opinion.

    The old rule of thumb was that the resolution should be 1.5-2 times your line screen. So for 200 screen frequency, 400 dpi would give the best results.

    Comment

    4OverCanonKBAAvantiXeroxSmartsoft (Presswise)DuploAMS

    Free Download

    Collapse

    canon=
    Print Embellishment Goes
    Straight To The Bottom Line

    See how your company can eliminate “Lowest Priced Bidder” from your pricing equation Download the Free White Paper.

    CanonXeroxSmartsoft (Presswise)Duplo4Over

    What's Going On

    Collapse

    There are currently 5122 users online. 90 members and 5032 guests.

    Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

    Working...
    X