Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Toner offset when printed back through a laser printer

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Toner offset when printed back through a laser printer

    I there any paper that works better when printing stationary items on a Xerox 8000, then imprinting or running them back through a Lexmark laser printer. Sometimes it works fine other times the color offsets.

    Thank you

  • #2
    Re: Toner offset when printed back through a laser printer

    It's not offsetting, you are simply re-fusing the toner at a different temperature and it is sticking to the Lexmark fuser rollers. I would not recomend to do this, you may find that you damage the Lexmark rollers

    Comment


    • #3
      Re: Toner offset when printed back through a laser printer

      A few questions.

      1) Are you running them back through right away?

      2) Are you letting the sheets stack up high in the Lexmark?

      3) Do you notice it happening more on coated paper?

      I have seen this issue on a Xerox Phaser. The main cause was heat. In your case the Xerox toner is getting re-melted by the Lexmark (just a theory no actual proof).

      A few things to try.

      1) Wait a few minutes before backing up and fan through the sheets to try to remove some of the heat.

      2) If number 1 doesn't fix it. Try not to let the pile get to high on the Lexmark. It bottles up all of the heat a dosen't let the toner cool. You may notice this issue more with coated stocks .

      I am no toner expert so someone else may chime in with a better solution.

      Edited by: damonpb on Nov 7, 2007 5:43 PM

      Comment


      • #4
        Re: Toner offset when printed back through a laser printer

        We avoid digitally printing letterheads altogether. A desktop laser printer will almost always ruin them.

        Comment

        4OverCanonKBATharsternAvantiXeroxSmartsoft (Presswise)Duplo

        Automation Article

        Collapse

        Avanti
        Why Would You Ever Want To Automate?
        It seems far too complex, costs money, involves a lot of people, will take time etc etc. And then you run out of excuses. Read the article.

        CanonXeroxSmartsoft (Presswise)DuploTharstern

        What's Going On

        Collapse

        There are currently 5804 users online. 88 members and 5716 guests.

        Most users ever online was 6,611 at 11:23 AM on 02-27-2019.

        Working...
        X