Standard Finishing
Xerox

Announcement

Collapse
No announcement yet.

Ink pilling on Impression cylinder

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    First thing that will solve your problem is better ink. If that's not available a simple wipe of your impression cylinders with a good liquid silicone such as Prisco Slide will help quite a bit. You should also consider getting rid of the IPA at your next roller change.
    Last edited by nhprinter; 01-02-2013, 05:39 AM.

    Comment


    • #17
      Orientation!

      Hello Al,


      mmm I wonder which Orientation, anyway a PDF for your perusal.


      Regards, Alois
      Attached Files

      Comment


      • #18
        An old school solution was to clean the cylinder well or even polish it then rub it down with fountain concentrate (not solution). Repelex was always the best.I'm not sure if that is still sold.

        Comment


        • #19
          if the press is a perfector press what is the condition of the impression cylinder jackets?

          Comment


          • #20
            You need to go to a high solids, low petroleum solvent type of ink formula. AS a general rule of thumb for the press person, the ink should NOT STAY OPEN any longer than "8" hours in bulk.

            Usually quite an easy fix via the ink medium. D

            Comment


            • #21
              might seem too obvious but I would also ensure you are not putting down too much ink on the first pass and/or unbalanced ink/water thereby causing emulsification and an ink film that will never dry!

              Comment


              • #22
                check the pressure ( cylinder - blanket ) you will fined it high.

                Comment


                • #23
                  Try car wax. Wipe wax on let dry wipe off

                  Comment


                  • #24
                    My name is Paul Thielen....I invented the "Thielen Solution" back cylinder paste in 1988.. It is still available. It was also private labeled under many different names. Contact me at pthielen572@gmail.com

                    Comment


                    • #25
                      Originally posted by pacificiam View Post
                      Thanx for your input.

                      can you suggest from where we ll get this wax?
                      We are printer from India.
                      My name is Paul Thielen....I invented the "Thielen Solution" back cylinder paste in 1988.. It is still available. It was also private labeled under many different names. Contact me at pthielen572@gmail.com

                      Comment

                      CanonKBAAvantiSmartsoft (Presswise)DuploEnfocusXerox

                      Free Download

                      Collapse

                      Trade Show Survey=
                      Instant October Trade Show Survey
                      Come On! Only 5 Questions

                      PRINT 19 and PRINTING United are squaring off in October.
                      Will you be at one of them?
                      Both? Neither?
                      Please take our 1-Minute survey to tell us about your plans for the two big fall shows!

                      Take The Survey.

                      CanonSmartsoft (Presswise)AvantiGraph ExpoKBAAvantiEnfocusGraph ExpoDuploXerox

                      What's Going On

                      Collapse

                      There are currently 4770 users online. 85 members and 4685 guests.

                      Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

                      Working...
                      X