Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

gloss meter

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • gloss meter

    please recommend suitable glossmeter brand or model for our offset post processes... thanks

  • #2
    We have a cheap meter that we use about 2 X per month.
    ETB-0686. Our meter reads the same as the coating rep's high dollar meter, no idea how long it would last if you used it everyday. We have had it for about 3 years. No complaints. We have compared it to the coating rep's meter a few times. It comes with a calibration plaque and is user friendly.

    Comment


    • #3
      If you use a single angle geometry gloss meter, then geometry angle should be selected for the gloss level.
      Are you measuring matte, normal, or glossy material?
      Steve Suffoletto

      Comment


      • #4
        we are required to measure matte and glossy materials. thanks

        Comment


        • #5
          60' is general purpose.
          20' is for glossy
          85' is for matte
          ISO 8254 has 3 parts 1,2,3.
          TAPPI uses 75' for paper

          Comment

          4OverCanonKBAAvantiXeroxSmartsoft (Presswise)Duplo

          Free Download

          Collapse

          Avanti
          Before You Buy A Print MIS Read This - FREE Download Link To Download

          CanonKBAXeroxSmartsoft (Presswise)DuploAvantiXeikonGraph Expo4Over

          What's Going On

          Collapse

          There are currently 3585 users online. 61 members and 3524 guests.

          Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

          Working...
          X