Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Digifold Pro Problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Digifold Pro Problem

    Hi, when we purchased our Digifold pro a number years ago the installing engineer told us not to press the compressor switch and system switch at the same time because this could cause the fuse in the plug to blow intermitently.
    Now the fuse is blowing intermitantly when we press the compressor switch on its own, does ayone else have this problem or has had this problem fixed.

  • #2
    Had the same problem many years ago. Canon technician was in at the time and suggested I use slow-blow fuses. Haven't had a problem since.

    Comment


    • #3
      thanks for the reply but its not the fuses in the machine its the actual 13A fuse in the plug. Can you get slow blow 13A fuses for plugs?

      Comment

      UltimateDuploSmartsoft (Presswise)4OverStandard FinishingKBA
      DuploStandard Finishing

      What's Going On

      Collapse

      There are currently 4871 users online. 112 members and 4759 guests.

      Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

      Working...
      X