Xerox plockmatick

Kyle Arn

Active member
Hello I have a Xerox Plockmatick attached to a Xerox Color Press 1000. I used to be able to have the 1000 set to feed directly into the plockmatick in the Fiery I would select bypass tray and it would feed in but for some reason The bypass tray has been grayed out. All the chords are connected just cannot select it as an option. Anyone have any ideas on what to do? Thanks in Advance
 
Don't know about the Xerox, but with a Ricoh we had to power down the machine, then power up the Plock and roll in place, then power up the machine again. The option was then available.
 
Thanks for your reply turns out the answer was in my Fiery Settings had to turn the DFA on to enable the option.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top