Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

problem in avantra

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • problem in avantra

    we have problem with avantra 44S when we power the machine in every morning it's turn off after a few moments we are try several times to solve this and boot normally

    note :
    1-when we are disconnect spinner motor power all things is ok
    2-our spinner it's new and tested and also dec board it's repaired by agency and tested ..
    3-the temperature of the room is little bit cool can the effect .

    any suggest

  • #2
    Re: problem in avantra

    Hi Lio,

    We have also faced the same problem and finally fixed it with replace the New Dec Board.

    Comment


    • #3
      Re: problem in avantra

      Hi lio

      we faced the same situation and the problem was in the cariage board, check it.

      Comment


      • #4
        Re: problem in avantra

        Hi lio

        I have suggestion hitting avantra 44 s your.

        First, Pleace chek DEC board versi software. next capture versions your dec software

        next send image capture in my email ( agusipp@yahoo.com) or your update software dec board to hig version.



        tqx

        Comment

        4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
        Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

        What's Going On

        Collapse

        There are currently 2753 users online. 45 members and 2708 guests.

        Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

        Working...
        X