Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Apogee vs Prinergy...looking for info

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Apogee vs Prinergy...looking for info

    I'm looking for a new employer and have a possible winner on the hook. He's suggested a trial period which we have not discussed in detail yet.

    All of my previous experience has been with *Prinergy* so I'm looking for some info on *Apogee* to get some idea of what to expect... pros/cons, comparisons, possible issues to watch for. I know this is kind of tough, I don't have any idea yet about what components of Apogee he has licensed. It's a fairly small shop with a DI doing a lot of small run books if that's any help. Screenshots and useful links welcome, maybe even training materials. I'd like a head start...

  • #2
    Re: Apogee vs Prinergy...looking for info

    PM me, I have some PDFs about ApogeeX (older versions but most is still accurate)
    Better train people and risk they leave - than do nothing and risk they stay.

    Comment


    • #3
      Re: Apogee vs Prinergy...looking for info

      Try this:


      http://www.agfa.com/en/gs/knowledge_...geex/index.jsp

      Let me know if you'd like more info.

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
      Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

      What's Going On

      Collapse

      There are currently 4555 users online. 91 members and 4464 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X