Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Agfa galileo vs error 0057 help needed please

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Agfa galileo vs error 0057 help needed please

    Hi

    thank you for all you for your help, im getting this error 0057 ("edge sensor never reads saturation") when i try to image a plate, the systems boots ok and everything seems to be in order, but then when a plate goes into the engine and tries to start the error shows, and stops everything and ask to reboot.

    the error showed for the first time after a plate was done, it is important to mention that the last plate was not complete (half of plate was filmed correctly and the other half was not filmed)

    do you have any idea of whats going on?, could you plesse help me?

    thank you very much

  • #2
    Hi sir Good morning
    Will be great idea to do calibration to the machine +Preventive maintenance work
    in order to set up the sensors, and cleaning many parts, for to avoid the errors.
    Calibration is a way to fix it many problem.
    If you need tech documentation i can provide too.
    Blessing
    superchock@yandex.com
    cell+whatsApp:+50588611441

    Comment


    • #3
      Edge detect sensor doesn't detect the beam.
      Contact me I will instruct you to resolve it. I

      farshad@armyaservices.com

      Regs,


      Farshad
      www.armyaservices.com
      Last edited by Armya Inc; 01-18-2018, 11:57 PM.
      Farshad . www.armyaservices.com,
      Sharing information for your success.

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
      4OverStandard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA

      What's Going On

      Collapse

      There are currently 5373 users online. 92 members and 5281 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X