Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Avantra 44xt Error17 after load

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Avantra 44xt Error17 after load

    Hello, need help with Avantra 44XT


    When Avantra load, the spinner is turned on, then sound end load (head go to zero), and Error 17.


    Enother dec board for testing we have not


    Авантра включается идет загрузка, проверяются все параметры, включается спинер (он крутится), потом звук завершения загрузки, потом голова идет в нулевую зону и выдет ошибку 17.

  • #2
    We tested DEC board and carriage board on another Avantra44 - it's work. but error 17 when avantra loaded
    Last edited by Stas_Repro; 04-02-2018, 05:07 AM.

    Comment


    • #3
      Replace the Spinner Motor.

      I have one like new for $2500 USD.
      Contact:
      farshad@armyaservices.com
      for more info.
      Farshad . www.armyaservices.com,
      Sharing information for your success.

      Comment


      • #4
        on another ctf he works (all head tested)

        Comment


        • #5
          IMO there is a problem with spinner encoder PCB. You can try to repair or swap from other spinner. BOL need to be adjuster afterwards.
          Mike

          Comment

          4OverCanonKBAAvantiXeroxSmartsoft (Presswise)DuploAMS

          Free Download

          Collapse

          canon=
          Print Embellishment Goes
          Straight To The Bottom Line

          See how your company can eliminate “Lowest Priced Bidder” from your pricing equation Download the Free White Paper.

          Canon4OverXeroxSmartsoft (Presswise)DuploAvantiXeikonGraph ExpoKBAAMSAvanti

          What's Going On

          Collapse

          There are currently 4508 users online. 83 members and 4425 guests.

          Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

          Working...
          X